7 Helpful Tricks To Making The Maximum Use Of Your Ghost Immobiliser Problems > 자유게시판

Protect Your Pride And Joy With The Ghost Immobiliser

Protect your pride & joy against theft by using the Ghost Immobiliser. It's discreet and does not require any additional key fobs to operate.

The device uses existing buttons in your vehicle (steering wheel, door panels & centre console) to create a unique pin code sequence up to 20 presses. This then authorizes the start-up of your vehicle.

Simple PIN code Change Process

With the growing rate of vehicle theft, many owners are looking to improve their security. There are many kinds of security products that are available for sale, from tracking systems to alarms and immobilisers. However, not all of these are equally efficient in protecting your vehicle. While a tracking system can assist in finding your vehicle in the event of theft, it does not stop the crime from occurring in the first in the first place. Immobilisers, on the other hand does exactly what it says on the tin: it shuts down your car's engine so that it is unable to be started. The Autowatch Ghost immobiliser is one of the most advanced options available on the market, making it nearly impossible for thieves to take your car.

Utilizing the buttons already in your car The ghost device is able to create a unique sequence which must be entered before the engine can start. This can be done using the indicator stalk, window or heater buttons. Additionally, there is also an app for mobile devices that acts as an emergency PIN code override and allows the driver to operate the car without using the button sequence. This is an excellent option if you want to give your car to valet parking or for Autowatch Ghost immobiliser servicing. The immobiliser will stay active.

The Ghost is an innovative and unique device that works with the buttons of your vehicle instead of as a standalone device. This means that it is not only a highly effective deterrent against vehicle theft but can also be transferred onto any other vehicles you may own, making it much more valuable than traditional steering wheel locks.

Small, weatherproof device

The Autowatch Ghost Immobiliser is an advanced security device that shields your vehicle from key cloning and hacking. It also stops ECU swapping. It's a weatherproof and small device that connects directly to your vehicle's ECU via the CAN data bus to shut down the engine. It can be installed in the vehicle without the need for extra wiring and has been thoroughly tested to make sure it works with all vehicles. It also is resistant to jamming devices which is an approach used frequently by thieves to get around the immobilisers in place.

The benefit of CAN data over conventional systems is that they operate silently. It isn't detected by sophisticated RF scanning or code-grabbing technology and is likewise unreadable by conventional diagnostic tools. The Autowatch ghost immobilisers does not produce LED indicators and instead uses the buttons on your vehicle such as steering wheel or centre console panels to create a unique, changeable disarm sequence. You can even create a sequence that is as long as 20 presses for added security. The iPhone app only allows one connection, using the Ghost's unique pairing code. the ghost immobiliser 2. All communication between the two devices is encrypted.

The Ghost also stops thieves from stealing a new key or replacing the ECU to bypass the immobiliser to start the engine. The engine can only be started only if a valid PIN is entered. It can also be put into Valet/Service mode for temporary operation (with defined parameters like a 30mph speed limit) so that you can hand your car over to a valet service for maintenance without having to enter a PIN code.

Tested for each vehicle

The Autowatch ghost immobiliser 2 is a world-first aftermarket immobiliser CANbus. It can be connected to the wiring of your vehicle and also to the engine control unit (ECU). The device detects electronic signals that block the system of your vehicle from running its normal startup routine until you input the passcode you have created. The system can be activated and deactivated using your own smartphone app without the need for additional wires.

The factory-installed immobilisers function with a transponder which is integrated into the key. It transmits a message to the ECU. The car will start when the correct code is transmitted. However, if the transponder from a different vehicle is used instead, the immobiliser won't recognize it. This enables the vehicle to start and be stolen. The Ghost immobiliser was created by an South African company at the top of the line in vehicle security technology. It safeguards your pride and joy from hacking, key cloning and even key theft. The only way that a burglar could steal your car is physically towing it away, and even then they would not be able to drive it.

Ghost makes use of the buttons on your vehicle including the indicator stalk, steering wheel and door panels to generate an individual PIN code that is changeable that must be entered prior to you can use your car. It does this without extra hardware, such as a keyfob. It can take up to 20 presses. It is also unrecognizable by devices for diagnosis and transmits radio frequency signals, so thieves cannot make use of sophisticated RF scanners or code-grabbing technologies to detect that a system has been installed.

Ghost is harder to remove than car alarms that require disarming with a series of buttons. This makes it a great complement to a GPS tracking device, which can be used to track your vehicle after it's stolen.

Emergency PIN code override

You don't have to look long on social media sites to find stories or videos of vehicles that have been stolen with the latest technology tools. This includes key-cloning devices and hacking tools that allow thieves to start the vehicle without your original keys.

The Ghost immobiliser has been specifically designed to prevent this and provide you with an additional layer of security to prevent your vehicle from being targeted by thieves. It creates an unique pin code push sequence using the buttons you have on the steering wheel, door panel, and the center console. The unique pin code is entered alongside the original key fob to stop the engine from beginning. The unique override pin is on the black card you will receive after installation. It is simple to remember since there aren't any LEDs.

The device is hidden in the wiring of your vehicle and doesn't emit radio signals. Therefore, it cannot be detected using diagnostic software which can identify the type of security system you have installed. This makes it a fantastic alternative to the tracker.

Unlike most other security systems, which have a relay in the engine bay, CANBUS Immobilisers communicate with the car's ECU and BCM via CAN data bus (brand dependant). This allows them to shut down the vehicle completely by sending a digital block to the ECU and engine.

It is also possible to connect a separate analogue immobiliser, alarm or tracker with these systems, however this must be specified before installing the device. They are also service/valet mode compatible and a great alternative to a tracker if you are having your car in for an electrical fault at the dealers.

Service/Valet Mode

In recent years there has been a rise in the number of vehicles being stolen with no owner's keys. With the ease of access to key cloning tools and door lock pick sets it is now easier than ever for thieves to steal your joy and pride. We have created the autowatch ghost immobiliser fitting near me immobiliser (discover here) to combat this. It stops your vehicle from being driven even if your keys have been copied.

It communicates directly to your vehicle's ECU (Engine Control Unit) through the CAN data circuit. It's completely quiet since it doesn't utilize radio frequencies or keys fobs. This means it isn't detected by diagnostics or other car hacking devices. It also prevents the addition of the key to a new one or replacing the ECU to get around the system as only the correct PIN code can allow the engine to start.

The device is hidden within your vehicle and is accessed by existing buttons on your steering wheel, centre console, and autowatch ghost immobiliser door panels. Before you can begin your car, you must enter a unique, changeable PIN code that can be as long as 20 numbers.

This is the first aftermarket immobiliser for CAN bus to be created that will stop your car being moved away or even started if a PIN code isn't entered before. If the device is in armed and you try to drive away, it will display an indicator on your dash, which will flash on a regular basis for approximately 300m, if you enter your PIN code at this point it will deactivate the anti-hijack system and your vehicle will continue to drive in the normal way. If you don't enter your PIN code at this point, the warning will continue to flash and require a new PIN code for every attempt to start your car.